Servo Motor Drive Auto Spray Painting Machine 400MM For Hardware

Maximum work piece size: 600mm * 600mm*

1.  Production: depending on the work piece
2. Number of spray gun: 2 branches,
3. Spray method: spray gun XY axis direction spraying,
4. Reciprocating speed: XY axis servo motor drive 0-1.5m/sec,
5. XY axis travel 1600 * 900 (mm)
6. Z adjustable range of up and down displacement stroke 400MM.
7. Spray gun angle: automatic adjustment, up and down angle 0-180 degrees
8. Control mode: touch screen input data, with programmable PLC central control box

1. The X axis sliding platform: 1 sets of Taiwan Zirun module, linear guide rail and slide THK Japan, the fastest speed of 1.5M/S, "Magodi" in Italy with the same steel belt, reciprocating precision, long service life, inertia servo motor of Japan's Matsushita 750W;

2. The Y axis sliding platform: Taiwan Zirun module 2 sets, linear guide and slide THK Japan, the fastest speed of 1.5M/S, "Magodi" in Italy with the same steel belt, reciprocating precision, long service life, Panasonic servo motor 750W;

3. Z: the combination of shaft lifting gear rack type adjustable structure, Italy magadyne belt steel wire synchronous belt, high repetition accuracy, 400W servo motor drive, speed of 0.2 meters per second, upper and lower displacement adjustable range 400MM;

4. W spray gun rotating shaft: motor fixed on the Z axis, through the turbine reducer and coupling to drive the rotating shaft of the spray gun, effectively avoid paint pollution, power use Taiwan race motor drive, angle 0-90 degrees adjustable; increase the gun rotating flexibility, can spray the work piece side

5. Work piece rotation platform: two station disk, angle can drive 90, 180. autobiography time 1-3S;

6. Standard stainless steel bottom plate, reducing the oil mist pollution, clean environment. The tray completely into water spray gun into the cabinet, drencher cabinets paint maintenance and cleaning work less, paint mist rebound less;

7. Axis of Revolution: 1 sets of revolution parts of structures produced by Taiwan 110 type high precision protractor control, chain drive, powered by the city of Taiwan gear motor, inverter, accurate positioning, stable performance, revolution of 180 degrees 2-4s.

8. Control system: Taiwan 10 inch color touch screen, the Japanese OMRON central controller, buttons and components are used in Taiwan brand, configuration of limit and the origin of induction switch, stable performance, teaching operation, can be equipped with various spraying procedures, can store and save the corresponding formula;

9. Frame: 100 * 100 square CRC and plate welding, edge plate with 4mm steel plate welded into modular structure,

10. Pallet fixture: equipped with standard flange, two times, customer own

11 . Machine size: W2600*D2100*H2250

Spray gun and paint supply:

Japan Anest Iwata 2, diameter 1.1mm

Taiwan Yadeke electromagnetic valve 2 set

Taiwan Yadeke pressure regulating valve and pressure regulating table 2 set

Taiwan Mitutoyo double diaphragm pump 1 Units

Taiwan high flow regulator 1

Buffer tank, suction tray, etc. 1

1 sets of 5 gallon mixers in Taiwan

Stainless steel paint bucket 1

2 groups of ultra soft coating pipes in Japan (including oil return system)

1 groups of trachea and joint